
Chapter 6. System Control Terminal Menus
SELFTEST | Write security: 3; Read security: 5 | |
| Runs | |
| tests are disruptive to all data traffic; therefore, do not run these tests on a | |
| unit unless data interruptions are acceptable. To confirm | |
| press Y; to cancel the | |
SELECTED | Write security: 3; Read security: 5 | |
TESTS | Allows the user to select a | |
| Choose from ALL TESTS, SLOT:SLT0 SYS CTRL, or any other installed | |
| option/network module. | |
CURRENT TEST | Read security: 5 | |
STATUS | Displays which part of SELFTEST is currently being run. See View Selftest Log | |
| on page | |
CURRENT SLOT/ | Read security: 5 | |
PORT | Displays slot and port of the subsystem currently being tested. | |
VIEW SELFTEST | Read security: 5 | |
LOG | Displays | |
| ||
| is looped back and a data pattern is sent and tested. The result of the self- | |
| test on each installed port is listed with Pass/Fail results. Figure | |
| a typical test log. | |
|
|
|
|
|
|
Figure 6-6. View Self-test Log
The
IDX | Index number of the log. |
TIME | Time and date of the log entry. |
SL | ATLAS 550 slot number. |
PT | ATLAS 550 port number. |
EVENT | Event description. |
RESULT | Shows Pass/Fail results. |
ATLAS 550 User Manual |