ADTRAN 550 user manual Dial Plan Menu

Chapter 11 Dial Plan

OVERVIEW

This chapter provides information on the DIAL PLAN, including discussions on interface configurations for the following modules:

•Dual T1/PRI (network and user terminations, for PRI and RBS)

•Dual Nx 56/64 (user termination)

•Quad BRI/U (network and user terminations)

In addition, a section is included on using the DIAL PLAN with Frame Relay (see Connecting Packet Endpoints in Frame Relay on page 11-28).

The DIAL PLAN submenus (see Figure 11-1) set global ATLAS 550 switch parameters as well as individual parameters for each ATLAS 550 port han- dling a switched call. The individual ports are separated into two port types: network and user. Network ports terminate a connection from the Network. User ports terminate incoming calls and, in turn may be con- nected to user equipment. Network Term on page 11-3 and User Term on page 11-6 provide clarification for these two port types. (See also Figure 11-2 on page 11-2 for the menu structure.)

Figure 11-1. Dial Plan Menu

In the following sections, INCOMING CALLS refers to calls coming to ATLAS 550 from the Network (PSTN) and OUTGOING CALLS refers to calls directed toward the Network (PSTN).

61200305L1-1 ATLAS 550 User Manual 11-1