ADTRAN 550 user manual To S LT/S, Rt/Pep, 1ST DS0, DSO Rate

Chapter 10. Dedicated Maps

TO SLT/S	Write security: 3; Read security: 5
	Specifies the slot to use for the second end of a connection. Select this
	option, and a list of all of the slots and the modules installed in the slots dis-
	plays. Pick the appropriate slot.
PRT/PEP	Write security: 3; Read security: 5
	Selects the port used for the second connection. When you select this
	option, a list of all the slots and available modules displays. Select the
	appropriate slot.

The ATLAS 550 does not support frame relay at a DS0 rate of 56K.

FROM CONFIG Write security: 3; Read security: 5

Specifies the configuration for the FROM connection. The selections dis- played in this field are based on the type of module selected in the FROM SLT option. You must input the following information—based on the module type.

1ST DS0

Write security: 3; Read security: 5

Defines the first DS0 for this endpoint. The ATLAS 550 uses DS0s, starting with this selection, to send and receive calls to and from the network. This option is module-dependent.

DS0 SELECTION

Write security: 3; Read security: 5

Defines DS0s for a T1 port. Use this field to define which DS0s will be used for this connection. You can enter the DS0s in several ways. For example, to enter DS0s one through five, enter 1-5. For DS0s one and five, enter 1,5.

DSO RATE

Write security: 3; Read security: 5

Defines the data rate per DS0. If FROM SLT is an Nx port, the data rate per

DS0 must be set. You can choose from 64 kbps or 56 kbps.

10-4 ATLAS 550 User Manual 61200305L1-1