ADTRAN 550 user manual Event Logging, Syslog Setup

Chapter 6. System Control Terminal Menus

	TOTAL LCV THRSH
	The DS1 performance monitor Threshold Value for the Current 15 minute
	Line Code Violations (LCV) parameter. The default value is 133,400 for an
	approximate BER level of 10E-5.
EVENT LOGGING	Write security: 3; Read security: 5
	Sets the system event severity level threshold for each of the ATLAS 550
	system event types. Whenever a system event occurs, that event is logged if
	the event’s severity level is equal to or more severe than the event type’s
	current threshold setting. See System Event Logging on page A-1 for detailed
	information on the system events.
SYSLOG SETUP	Write security: 3; Read security: 5
	Configures the ATLAS 550 Syslog client for use with a Syslog server (sup-
	plied on ADTRAN/Utility disk or available on most UNIX platforms).
TRANSMISSION	Enables or disables the transmission of log events to the external Syslog
	server.
HOST IP	Lists the IP address of the external server that is running the Syslog host dae-
ADDRESS	mon.
HOST FACILITY	Specifies the facility destination of log events. Facilities are
	located on the host and are managed by the Syslog host
	daemon running on either a UNIX machine or a PC.

REAL TIME CLOCK Write security: 3; Read security: 5

Provides access to the following two options that you can review and edit:

CURRENT TIME/ Displays the current date and time, including sec-

DATEonds. To edit this field, enter the time in 24-hour format (such as 23:13:47 for 11 pm, 13 minutes and

47seconds), and enter the date in mm-dd-yyyy format (for example,

11-08-1999).

AUTO DAYLIGHT	When enabled, automatically updates the time and date when Daylight Sav-
SAVINGS	ings Time starts and, also, when Standard Time starts.

6-14 ATLAS 550 User Manual 61200305L1-1