ADTRAN 550 user manual Usage Characters, Character Description

Chapter 8. Packet Manager

USAGE		Read Security: 5
		This field displays a 7-character summary of the references to this link.
		Each character can be a dash (-), or it can be a character indicating the
		resource represented by the character position (see Table 8-2 on page 8-11).
			Table 8-2. Usage Characters
	Character		Description
	1		Packet connection in the first dedicated connections map.
	2		Packet connection in the second dedicated connections map.
	3		Packet connection in the third dedicated connections map.
	4		Packet connection in the fourth dedicated connections map.
	5		Packet connection in the fifth dedicated connections map.
	s		Switched packet connection in the dial plan.
	u		Used by one or more packet switch connections or packet voice
			entries.

Packet voice entries are in either the DEDICATED MAPS or the

DIAL PLAN.

TEST	Provides menus for controlling test options for packet endpoints.
ENDPNT NAME	Read Security: 5
	Displays the name of the packet endpoint.
PROTOCOL	Read Security: 5
	Displays the protocol running on this packet endpoint.
SUBLINK	Write Security: 3; Read Security: 5
	Displays test menus for the packet endpoint sublinks. The menus vary
	depending on the protocol. Testing is not supported on TBOP.
	NAME
	User-defined name for the DLCI.
	DLCI
	Local address for each PVC as assigned by the carrier.
	TEST
	Shows the test mode for this PVC.

61200305L1-1 ATLAS 550 User Manual 8-11