
Chapter 11. Dial Plan
| STRIP MSD does not affect CALL ACCEPT criteria. All of the digits |
| (including the MSDs that are subsequently stripped) are used as |
| accept criterion. |
SOURCE ID |
|
Write security: 3; Read security: 5 | |
| Simplifies the creation of a DIAL PLAN in applications where the criterion for |
| switching calls to a certain endpoint is a function of which endpoint origi- |
| nated the call. |
| • Default value = 0. The default ID for all endpoints is 0 and all accept |
| numbers is 0. With default values, all calls are routed based only on the |
| dialed number. |
| • Multiple endpoints can have the same SOURCE ID. |
| • When creating the CALL ACCEPT list, specify a SOURCE ID(s) as well as a |
| dialed number or range of dialed numbers to accept. |
| Example: |
| An application requires that all calls that originate from Port 1 of the |
| ATLAS 550 in Slot 1 be switched to Port 2 of that same module. Assign a |
| unique Source ID (e.g. 7) to Port 1 of the module, and then configure Port 2 |
| to only accept calls from that unique Source ID (7). |
DIAL ON OFFHOOK | Write security: 3; Read security: 5 |
| Defines a number that is automatically sent to the switchboard when a call |
| on this endpoint goes off hook. |
The Dial on Offhook number must be specific (i.e., no "wild cards").
DUAL NX56/64 MODULE: USER TERMINATION
The Dual Nx56/64 can only serve as a USER TERMINATION endpoint.
When you are working in the USER TERM section of the DIAL PLAN menu, and the SLT is defined as
ATLAS 550 User Manual |