ADTRAN 550 user manual Call Routing Table for Routing Using Incoming Number

Chapter 11. Dial Plan

RANDOMIZE TIMER

Write security: 3; Read security: 5

Enables/disables random delay added to the redial timer to avoid glare.

RETRY COUNT

Write security: 3; Read security: 5

Defines the number of redials to attempt.

OUTGOING CALLER ID

Write security: 3; Read security: 5

Defines the presentation of the calling party number for this endpoint.

SOURCE ID

Write security: 3; Read security: 5

Used to simplify the creation of a DIAL PLAN in applications where the crite- rion for switching calls to a certain endpoint is a function of which endpoint originated the call. For further details, see Source ID on page 11-14.

ROUTE INCOMING CALL

Write security: 3; Read security: 5

Used to define the method which incoming calls are associated to the packet endpoints. This item can have three options:

USING INCOMING NUM

Endpoint selection based on the incoming number.

USING CALLING PARTY NUM

Selection based on the Call ID as presented by the calling party. If this option is selected, the CALL PARTY NUMBER field is made available to the interface configuration. This number allows you to configure the calling part number used to select this packet endpoint.

CALL ROUTING TABLE

Read security: 5

This table is only visible if GROUP is selected in the PRT/PEP field. The table format changes, based on the selected routing option. See Figure 11-9, below and Figure 11-10 on page 31. For each case, CALL PARAMS contain

OUTDIAL#, CALLER ID, and SOURCE ID.

Figure 11-9. Call Routing Table for Routing Using Incoming Number

11-30 ATLAS 550 User Manual 61200305L1-1