Agilent Technologies S GSM, 8922M manual GSM/DCS1800/P

Screens

Cell Control - Active Cell

4.	Bit Error	This field displays the bit error or fast bit error measurements screen depending on
		which mode has been set in these screens.
		See Also	Screens: Bit Error or Fast Bit Error
5.	Call Status	This field displays the status of the communication between the mobile phone and
		the Agilent 8922M/S. For the active cell, the states are:

•Inactive

•Proceeding

•Alerting

•Connected

6.Channel (Base This field selects which channel the Agilent 8922M/S transmits the Broadcast

Station)	Channel (BCCH) information. If this is changed during a call, the call will be
	deactivated.
7. CW Meas	This field displays the CW measurements screen.
8. dBm	This field displays the units of the Peak Power measurement.
	See Also	Keys: ON/OFF, HI LIMIT, LO LIMIT, REF SET, AVG,
		UNITS, METER
9. GSM900/E-	This field selects the type of mobile that is to be tested.
GSM/DCS1800/P	Choices	GSM 900
CS1900
		E-GSM
		DCS 1800
		PCS 1900
10. Out RF SP	This field displays the output RF spectrum measurements screen.

11.Peak Power This field displays the measured peak carrier power.

NOTE	The measurement display will not update if there is no signal to measure. This
	includes the case where the expected input level has been set too high.
12. Phase/Frq	This field displays the phase and frequency measurements screen.

4-28