Agilent Technologies 8922M, S GSM manual Only, Range GSM900, Gsm, Call See Also Specifications

		Screens
		Cell Control - Active Cell
13. Pwr Ramp		This field displays the power mask and, (option 006 only), pulse measurements
		screens.
14. Pwr Zero		This field zeros the power meter. RF power must be disconnected from the RF
		IN/OUT port when executing this function.
15.	Reset	This field resets all the Agilent 8922M/S’s measurements.
16.	Scope	This field displays the oscilloscope measurements screen.

17.Spec Anl (Option This field displays the spectrum analyzer measurements screen.

006 only)

18.Mobile Reports The mobile reports reflect the status of the signal being received by the mobile phones receiver.

19.TX Level/Manual This field sets the expected input level of the RF Analyzer on the RF IN/OUT port. This level must be within ±3 dB of the actual level in order that fully calibrated

measurements may be made.

This field displays the amplitude the Agilent 8922M/S is expecting from the mobile phone, and adjusts its RF analyzer setting to match this input. When this field is changed, the mobile phone TX Level and the Agilent 8922M/S RF Analyzer are no longer coupled together. This means that you have independent control of the amplitude of the transmitted mobile phone signal and the sensitivity of the Agilent 8922M/S analyzer circuit.

When the fields are coupled, the Expected Input shows the power level of the setting. When they are independent, the Expected Level displays Manual.

Range	GSM900 and	−27.9 to +41.0 dBm.
	E-GSM:
	The fields in the Mobile Phone area display information about
	the call.
See Also	Chapter 3: Specifications

20.Channel (Mobile) The channel field allows you to change the channel number of the call, either before or during the call. If this field is changed when a call is in progress, a handover is performed.

4-29