Agilent Technologies S GSM, 8922M manual Polarity, Trg Timing

Screens

Phase/Freq, Data Bits

NOTE		When measuring noisy signals (approx 10° rms), define your entire burst as a User
		Defined Sync Pattern, and select Expected. This will eliminate the problem of bit
		errors causing gross peak phase errors.
		See Also	Screens: Measurement Sync
3.	Polarity	This field toggles the polarity of the displayed bits.
4.	SyncStatus	This field displays any errors that occurred while trying to synchronize to the
		demodulated data.
		See Also	Making Measurements: Solving Problems Messages
5.	Trig Delay	This field sets the time delay between a valid trigger event and the beginning of a
		measurement.
		Range	0 to 5000.00 μs.
6.	Trg Timing	This First Bit field displays the position in time of the first useful bit relative to the
		delayed measurement trigger.
		See Also	Keys: ON/OFF, HI LIMIT, LO LIMIT, REF SET, AVG, Units
			The FMErr Count field displays the number of bit differences
			detected when comparing the demodulated data bits to the
			selected midamble or user defined synchronization pattern
			when Sync Mode is set to Midamble. This field will display 0 if
			Sync Mode is set to Amplitude.
			Screens: Measurement Sync (Sync Mode)
7.	View	This field selects alternate views of the measurement.
		Choices	Phase Frq
			Phase Err

4-94