Agilent Technologies S GSM, 8922M Edit Sequence Screen on the HP/Agilent, Editing Test Parameters

Instrument BASIC

Programming and Using the TESTS Subsystem

Test Sequence as described below.
3 When finished editing sequence select			to return to test screen.
	TESTS
a. Select either Edit Parm or Edit Spec from the test function field
to continue editing.
OR
b. If editing is complete, select			and press		or select
		TESTS		L2
Continue to return to the Edit Proc screen, then press							or select
						L1
Run to run the modified test procedure.

To add tests, select the following keys according to the labelled steps in

Figure 8-15 on page 8-34:

1 Press L1 or select Insrt Stp to insert a step.

2Select the test name (example TEST_09) to modify the inserted step.

3Select a new Test name for the inserted step.

4Press L2 or select Delet Stp to remove steps from a procedure.

Figure 8-15	Edit Sequence Screen on the HP/Agilent 83212X
NOTE	The tests you select determine the specifications that are required.
	Editing Test Parameters
	From the Edit Procedure screen (see Procedure Development section in this
	chapter), select the following keys:

8-34