Agilent Technologies 8922M, S GSM manual Storing Ibasic Programs On Memory Cards

Storing IBASIC

Programs On

Memory Cards

Instrument BASIC

Loading, Storing, and Running

1Use the previous procedure to download your program into the Agilent 8922M/S’s RAM.

2 Press LOCAL , SHIFT , CANCEL on the Agilent 8922M/S to perform an IBASIC reset.

3If your memory card has not been initialized, insert your memory card into the Agilent 8922M/S and enter the following command on your computer:

Storing an IBASIC

Program On A GPIB

Disk Drive

OUTPUT 714;”PROG:EXEC ‘INITIALIZE””:INTERNAL””’”

4Insert the initialized memory card into the Agilent 8922M/S.

5Define the memory card as the Mass Storage device by entering the following command on your computer:

OUTPUT 714;”PROG:EXEC ‘MSI “”:INTERNAL””’”

6Save your program to the memory card by entering the following command on your computer:

OUTPUT 714;”PROG:EXEC ‘SAVE “”<filename>””’”

7Press LOCAL .

1Insert the disk into the drive.

2Access the IBASIC controller screen from the Test Function field on the TESTS screen.

3Using the knob, select the field and enter the following command to save your program:

Running Your Program

Loading a Test Procedure

STORE “<filename>:7xx,x”

Once the program is loaded into the IBASIC Controller’s RAM, it can be run by using the knob to enter the RUN command, or by selecting the Run field in the top right corner of the screen.

A Test Procedure file includes all the user defined channels, frequencies, limits, and values from the Test Executive for the radio under test. You can make as many Test Procedure files as needed for the different radios you are testing.

1 Press the front-panel TESTS key and select the Location field. Refer to item (1), see Figure 8-2 on page 8-12.

2Choose the location (Card, ROM, RAM, or Disk) where the Test Procedure is found. Refer to item (2), see Figure 8-2 on page 8-12. (The location you select appears in the field (1) area.)

8-11