Agilent Technologies S GSM, 8922M manual Test Procedure and Test Library Files

Instrument BASIC

Loading, Storing, and Running

2

1

Figure 8-4 Test Procedure and Test Library Files

3Select the Procedure field shown by item (3), see Figure 8-5 on page 8-15.

4Enter the Test Procedure filename that you want to make or delete by using the alpha/numeric list of characters shown by item (4), see Figure 8-5 on page 8-15.

5Select the Location to Make or Delete field shown by item (5),

see Figure 8-5 on page 8-15, then select the file’s location to be on memory card, RAM, or Disk from the list of choices shown in item (4).

6Enter up to two lines of comments to identify the new Test Procedure. Refer to item (6), see Figure 8-5 on page 8-15.

7Select whether the new Test Procedure will use the current Test Library or if it will use no library as shown by item (7), see Figure 8-5 on page 8-15.

8Select where the program for the Test Procedure is to be found. Refer to item (8), see Figure 8-5 on page 8-15.

9Select the Make Procedure field or the Delete Procedure field as shown in item (9).

Use the Pass Number field in the lower-right corner of the Procedure Manager menu to unsecure a Test Procedure file. The ROM program SECURE_IT is used to secure Test Procedure files.

8-14