Agilent Technologies 8922M, S GSM manual Slp

APPENDIX A

Setting Up the HP/Agilent 37900D

From the HP/Agilent 37900D start-up screen highlight MANUAL MODE. Select t until CONFIGURATION is highlighted then hit ➡ Retur .

PERSONALITY

APPLICATIONS MANUAL MODE

HELP

Then from the CONFIGURATION MODE menu, press ’M’ and select the slot to be modified.

Set up the parameters for Port A as shown below

					RS-449/422, RS-232
SLP					Port A		Port B
Slot		Card	+---------------------------		+-------------------------		+
3	RS449/422,RS232			RS449 DCE	I’FACE HIGH M	RS232 DTE	I'FACE HIGH M
2	Slave Signal
1			No Card			No Card
0			No Card			No Card
			+---------------------------		+-------------------------		+

------------------------------------------------------------------------------

	{{CURRENT SETTING}}
I - Interface	>> RS-449/442	>> RS-449/442
S * connection Setup	>> MONITOR	>> MONITOR
D - DCE/DTE	>> DCE	>> DTE
C - Clock source	>> I/FACE HIGH	>> I/FACE HIGH
T - TXD Timing source	>> TX CLOCK DTE SOURCED	>> TX CLOCK DCE SOURCED
P - mark Polarity	>> NORMAL	>> NORMAL
O - modify Other port	A - Auto-configure other	port	Q - Quit
Enter menu option:

For Example, to change the Interface Setting;

Press ’I’

A new menu is shown listing the available options. When you have selected the required option, you are returned to the above menu.

Select Quit (’Q’ from keyboard) twice.

Select Yes (’Y’ from keyboard) to return to start-up screen.

Refer to the HP/Agilent 37900D Monitor Guide for detailed information on using the HP/Agilent 37900D Signaling Test Set.

A-7