Agilent Technologies S GSM, 8922M manual Output RF Spectrum, Main View Option 006 Only, Freq Offset

Screens

Output RF Spectrum, Main View (Option 006 Only)

Output RF Spectrum, Main View (Option 006 Only)

5 3

1

8 2 4 7 6

The Agilent 8922M/S uses a 3-pole synchronously tuned filter to make Output RF Spectrum measurements rather than a 5-pole filter as specified in the GSM recommendations. Refer to Section titled “Output RF Spectrum Measurements Using a 3-Pole Synchronously Tuned Measurement Filter” in Chapter 2.

1.	Amplitude	This is a copy of the RF Analyzer Amplitude field. This is the amplitude to be
		assumed at the selected input port, see RF Analyzer Functions).
		Range	RF IN/OUT: −27.9 to +41.0 dBm. AUX RF IN: −58.0 to +20.0
			dBm.
		See Also	Screens: RF Generator/RF Analyzer, (RF Analyzer)
2.	Freq Offset	This sets the frequency offset for the Output RF Spectrum measurement. This field
		is used when not making reference measurements. The offset used is 0.0 kHz when
		Mode is set to Ramp Ref or Mod Ref.
		Range	−2.0 MHz to +2.0 MHz.
3.	Sync Status	This field displays any errors that occurred while trying to synchronize to the
		demodulated data.
		See Also	Making Measurements: Solving Problems Messages

4-82