Agilent Technologies S GSM Flatness, Power over the useful bits in the measured burst, Summary

	Screens
	Pwr Ramp: Summary
3. Flatness	This field displays the positive and negative amplitude peaks relative to the average
	power over the useful bits in the measured burst.

•Pk+ peak, relative to the average power.

•Pk− is the negative amplitude peak, relative to the average power.

See Also Keys: ON/OFF, HI LIMIT, LO LIMIT, REF SET, AVG, Units

4.Measurement This field displays whether HI/LO limits set for the measurement display fields,

Summary	(Ampl1-12 and flatness) were exceeded in the last measurement.
	See Also	Making Measurements: Solving Problems, Messages
5. Pk TX Pwr	This field displays the average transmitted power over the useful bits in the
	measured burst. It is measured from the center of the first useful bit to the center of
	the last useful bit. This measurement is only available when using the RF IN/OUT
	port.
	See Also	Keys: ON/OFF, HI LIMIT, LO LIMIT, REF SET, AVG, Units
6. SyncStatus	This field displays any errors that occurred while trying to synchronize to the
	demodulated data. During multi-burst measurement, this field indicates the
	measurement progress. When the measurement is complete, the SyncStatus is
	displayed.
	See Also	Making Measurements: Solving Problems Messages
7. Time1-12	These fields select the time (relative to the center of bit zero) the amplitude will be
	measured on the amplitude envelope. Bit zero is the first useful bit in the measured
	burst.
	Range	−50.0 to +593.0 μs.
8. Trig Delay	This field sets the time delay between a valid trigger event and the beginning of a
	measurement.
	Range	0 to 5000.00 μs.

4-102