Agilent Technologies S GSM manual Using Autostart, Tests Screen of the Agilent 8922M/S

Instrument BASIC

Programming and Using the TESTS Subsystem

Using Autostart

Ensure the Autostart field toggle is set to On (see Figure 8-13 on page 8-32 (1)); this allows the Agilent 8922M/S to go straight to the Procedure Menu each time the Agilent 8922M/S is switched on, providing a Memory Card is inserted in the front panel of the Agilent 8922M/S.

If the Procedure Menu screen does not appear on the Agilent 8922M/S display, select TESTS and load the procedure.

Figure 8-13 Tests Screen of the Agilent 8922M/S

Making a Test Sequence

The Test Sequence menu lets you select radio tests and the order you want them performed.

1Select the Edit Seqn field. A test-sequence screen similar to that shown in Figure 8-14 on page 8-33 appears.

2Select the Insrt Stp field or Delet Stp field as needed to insert or delete tests on the screen. Refer to item (1) in Figure 8-14 on page 8-33.

3Select the Step # field and turn the knob to the test you want to change. (As you turn the knob, the test’s step number, name, and description changes.

4Select the Test Name field and turn the knob to select the desired test. Refer to item (4) in Figure 8-14 on page 8-33. (As you turn the knob, the test name and description changes along with the test number shown in the Choices menu.

8-32