Agilent Technologies S GSM, 8922M manual Setting Up the HP/Agilent 37900D, Card

APPENDIX A

Setting Up the HP/Agilent 37900D

Setting Up the HP/Agilent 37900D

Check Software Ensure that HP/Agilent 37966B and HP/Agilent 37967A software has been installed into the HP/Agilent 37900D. This software enables the HP/Agilent 37900D to communicate with the Agilent 8922M.

Set Personality From the HP/Agilent 37900D start-up screen highlight PERSONALITY and

select t . This will display a submenu of personality options. Select t until 8922G is highlighted then hit ➡ Retur .

PERSONALITY APPLICATIONS

MANUAL MODE

HELP

NOTE	It is acceptable to select 8922G from the HP/Agilent 37900D. This option is a drop-
	in replacement for 8922M.

Set Up Interface Ensure that the HP/Agilent 37913A Interface Card is set up correctly. Refer to the list

Card	below for Port A setting requirements;
Table 1
		Port A Settings
	Interface	RS-449/442
	Connection Setup	MONITOR
	DCE/DTE	DCE
	Clock Source	I’FACE HIGH
	TxD Timing Source	TX CLOCK DTE SOURCED
	Mark Polarity	NORMAL

A-6