Agilent Technologies 8922M, S GSM manual See Also Keys Print, Choices Serial, Parallel, Print Title

Screens

		I/O Configuration
13. Parity	This field selects parity for the rear panel serial port.
	Choices	None
		Odd
		Even
		Always 1
		Always 0
14. Print Adrs	This field sets the GPIB print address. This field only appears when the Printer Port
	is set to GPIB.
	Range	0 through 30

15.Print Cancel This field cancels printing.

See Also Keys: Print

16.Printer Port This field allows you to select the printer port. The default setting is Serial.

	Choices	Serial
		HP-IB(Note that the GPIB address is also required with this
		selection.)
		Parallel
17. Print Title	This field is used to enter a title, up to 50 characters, to be printed at the top of all
	screen printouts.
	Choices	Done enters the data into the Agilent 8922M/S.
		Position moves the cursor to any position in the title block.
		Over/Ins When the cursor is blinking, you are in insert mode.
		when the cursor is not blinking, you are in typeover mode.
		Delete erases the character at the cursor.
		Del End erases all the characters from the cursor position to the
		end of the string (including the character at the cursor).
		Bk Space erases the characters in the space previous to the cursor.
		Upper and lower case letters: A through Z.
		Numerals: 0 through 9
		Special characters: space _ " # $ % & ’ ( ) * + , - . / : ; < = > ? @ [
		\ ] ^ ‘ { } ~

4-61