Avaya 106760804 manual Ip dvmrp timers basic

Chapter 7

ip dvmrp timers basic

Command Mode DVMRP Router Configuration.

DescriptionAdjusts the DVMRP network timers. Use the no form of this command to return to the default values.

Syntax

To Configure:	ip dvmrp timers basic <rte-update> <rte-expire>
	<rte-holddown>
To Restore	[no] ip dvmrp timers basic
Default:

	Table 7-9. Parameters, Keywords, Arguments
	Name	Definition
	<rte-update>	Configures the DVMRP route reporting interval. The range of
		frequencies at which updates are sent is 30 to 90 seconds. The
		default setting is 60 seconds.
	<rte-expire>	Interval of time, in seconds, after which a DVMRP route
		expires. The valid range is 70 to 190 seconds. The default
		value is 140 seconds.
	<rte-holddown>	The amount of time, in seconds, that must pass before the route
		is removed from the routing table. The valid range is 120-380
		seconds. The default setting is 120 seconds.
Sample Output	The following example configures the IP DVMRP timers basic with route
	update time of 35 seconds, a route expiration time of 75 seconds and route
	holddown time of 145 seconds.
	(configure router:dvmrp)# ip dvmrp timers basic 35 75 145
Systems	P550R, P580, P880, and P882.

7-12 Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1