Avaya 106760804 manual Ip ospf as-boundary-router, To Enable

Chapter 19

ip ospf as-boundary-router

Command Mode	Global Configuration.
Description	* Important: This command is not supported by v6.0 and later
	application software.
	Version 6.0 and later application software automatically detects the ASBR
	status:
	■ If route redistribution filters are configured for OSPF, the ASBR
	status is enabled.
	■ If all interfaces on the switch are in an OSPF stub area, the ASBR
	status is disabled, regardless of whether route redistribution filters are
	configured.
	For more information on route redistribution filters, see “Configuring Route
	Redistribution” in Chapter 12, “Configuring IP Routing” of User Guide for
	the Avaya P580 and P882 Multiservice Switches, Software Version 6.1.
	In earlier versions of application software, this command specifies if the
	router is an autonomous-system boundary router (ASBR). Use the no form
	of this command to disable ASBR status. The default state is disabled.
Syntax
	To Enable:	ip ospf as-boundary-router
	To Disable:	[no] ip ospf as-boundary-router
Systems
	P550R, P580, P880, and P882.

19-12 Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1