Avaya 106760804 manual Set console transfer ppp, Configure# set console transfer ppp

Chapter 5

set console transfer ppp

Command Mode	Global Configuration.
Description	Transfers control of the serial console port and the CLI session to the PPP
	protocol layer.
	This command is accepted only when the console serial port is configured
	in PPP mode.
	When accepted, this command immediately terminates the current CLI
	session, logs the user out, and switches the I/O on the serial console port
	from the CLI processing software to the PPP layer. The remote host also
	needs to simultaneously change its I/O to use PPP software. This command
	is NOT stored (no back-end), and is only for use when the user has
	successfully dialed-into the switch. This command can only be accepted
	when the Console Serial Port is configured in PPP mode.
	The command cannot be accepted from a telnet session, it can be accepted
	only over directly connected serial sessions, and most preferably from a
	post-dial modem terminal session on the remote host.
Syntax	set console transfer ppp
Sample Output	The following example sets the console transfer ppp.
	(configure)# set console transfer ppp
Systems	P550R, P580, P880, and P882.

5-8 Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1