Avaya 106760804 Ip multicast prune-source, Configure if1# ip multicast prune-source host-addr

	DVMRP
ip multicast prune-source
Command Mode	Interface Configuration.
Description	Configures the host address used in DVMRP prune packets forwarded on
	this interface. The no form of this command restores the default, which is
	host-addr.

Syntax

To Configure:	ip multicast prune-source {host-addr network-addr}
To Restore	[no] ip multicast prune-source
Default:

	Table 7-10. Parameters, Keywords, Arguments
	Name	Definition
	host-addr	The full host address is used in the prune packet for the source
		address.
	network-addr	Only the network portion of the address is used in the prune
		packet.
Sample Output	The following example configures the DVRMP prune packets to the host
	address for interface 1.
	(configure if:1)# ip multicast prune-source host-addr
Systems	P550R, P580, P880, and P882.

Document No. 10-300090, Issue 1 7-13