Avaya 106760804 manual Set port edge admin state

Chapter 28

set port edge admin state

Command Mode	Global Configuration.
Description	Specifies whether a port is an edge port or a nonedge port. An edge port is
	not connected to any other bridge. Only edge ports and point-to-point links
	can rapidly transition to forwarding state.
	If you set edge admin state to edge-port, the OperEdgePort field of the
	show port command is also set to edge-port. However, if the port receives a
	BPDU, the Oper Edge Port setting changes to non-edge-port. (To receive a
	BPDU, the port must be connected to a bridge and thus is not an edge port.)
Syntax	set port edge admin state <mod-swport-range> [...,<mod-swport-range>]
	{edge-port non-edge-port}

Table 28-1. Parameters, Keywords, Arguments

Name

Definition

<mod-swport-	The module and port or port range.
range>
edge-port	Defines the port as an edge port.
non-edge port	Defines the bridge as a nonedge port.

Systems P580 and P882.

28-2 Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1