Avaya 106760804 manual Ip route-preference, Configure# ip route-preference rip

Chapter 11

ip route-preference

Command Mode	Global Configuration.
Description	Assigns preference values to routes. The IP routing table uses these values
	to determine the best routes. The no form of this command restores the
	default settings.
Syntax
	To Configure:	ip route-preference {local rip ospf-intra ospf-inter
		ospf-extra static-hp static-lp <value>
	To Restore	[no] ip route-preference {local rip ospf-intra ospf-
	Default:	inter ospf-extra static-hp static-lp}

	Table 11-21. Parameters, Keywords, Arguments
	Name	Definition
	{local rip ospf-intra	The route keywords are:
	ospf-inter ospf-extra	•	local - locally connected routes.
	static-hp static-lp}
		•	rip - route learned via the RIP protocol.
		•	ospf-intra- OSPF intra-area routes.
		•	ospf-extra- OSPF external routes.
		•	static-hp- high preference static routes.
		•	static-lp- low preference static routes.
	<value>	Preference value assigned to the specified route. The
		higher the value, the more preferable the route. Valid
		preference values range from 0 to 255.
Sample Output	The following sample assigns a preference of 100 to RIP routes.
	(configure)# ip route-preference rip 100
Systems	P550R, P580, P880, and P882.

11-42 Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1