Avaya 106760804 manual Passive-interface, To Disable

Chapter 19

passive-interface

Command Mode	OSPF Router Configuration.
Description	Prevents OSPF from sending routing updates across the network. To disable
	passive interface, use the no form of this command.

Syntax

To Enable:	passive-interface{<interface-name> <ip-address>}
To Disable:	[no] passive-interface {<interface-name> <ip-
	address>}

	Table 19-20. Parameters, Keywords, Arguments
	Name	Definition
	<interface-name>	Name of the interface on which OSPF runs.
	<ip-address>	IP address of the interface on which OSPF runs.
Sample Output	The following command enables passive interface on the interface labeled
	boston with an ip address of 10.0.7.123.
	(configure router:ospf)# passive-interface boston 10.0.7.123
Systems	P550R, P580, P880, and P882.

19-28 Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1