Avaya 106760804 manual Set spantree hello, Parameters, Keywords, Arguments

Chapter 28

set spantree hello

Command Mode	Global Configuration.
Description	Sets the spanning tree bridge hello time. The bridge hello time is the time
	between generation of BPDUs by the root bridge.The default time is 2
	seconds.
Syntax	set spantree hello <hellotime-value>{802.1D vlan {<vlan-id> name
	<vlan-name>}}
	Table 28-10. Parameters, Keywords, Arguments
	Name	Definition
	<hellotime-value>	The hello time value for the bridge, in seconds. The ranges
		is 1-10 seconds. The default setting is 2 seconds.
	802.1D	Use this keyword if the switch is running IEEE 802.1D
		Spanning Tree. For a detailed description of IEEE 802.1D
		Spanning Tree, see Chapter 7, “Configuring Rapid
		Spanning Tree,” in User Guide for the Avaya P580 and
		P882 Multiservice Switches, Software Version 6.1.
	<vlan-id>	The VLAN ID of the bridge.
		Use the vlan <vlan-id>keyword and variable when the
		switch is running per-VLAN or dual-layer Spanning Tree.
		For a detailed description of per-VLAN and dual-layer
		Spanning Tree, see Chapter 7, “Configuring Rapid
		Spanning Tree,” in User Guide for the Avaya P580 and
		P882 Multiservice Switches, Software Version 6.1
	<vlan-name>	The VLAN name of the bridge.
		Use the vlan name <vlan-name>keyword and variable
		when the switch is running per-VLAN or dual-layer
		Spanning Tree. For a detailed description of per-VLAN and
		dual-layer Spanning Tree, see Chapter 7, “Configuring
		Rapid Spanning Tree,” in User Guide for the Avaya P580
		and P882 Multiservice Switches, Software Version 6.1
Sample Output	The following example sets the spanning tree hello time to 5 seconds:
	(configure)# set spantree hello 5 802.1D
	Bridge Hello Time Successfully set to 5
Systems	P550R, P580, P880, and P882.

28-16 Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1