Avaya 106760804 manual Ipx type-20-propagation, To Enable

Chapter 13

ipx type-20-propagation

Command Mode	Interface Configuration.
Description	Specifies whether or not an IPX interface accepts and forwards IPX type 20
	propagation packet broadcasts. The default setting is disabled.

Syntax

To Enable:	ipx type-20-propagation {both inbound outbound}
To Disable:	ipx type-20-propagation disabled

	Table 13-16. Parameters, Keywords, Arguments
	Name	Definition
	{both inbound	•	both - The interface accepts and forwards type 20
	outbound}		propagation broadcast packets. This is the default.
		•	inbound - The interface only accepts type 20
			broadcast packets.
		•	outbound - The interface only forwards type 20
			propagation broadcast packets to other network
			segments.
		•	disabled - The interface does not accept or forward
			type 20 propagation broadcast packets.
Sample Output	The following example forwards type 20 propagation broadcast packets to

other network segments on an interface labeled “boston”.

	(config-if:boston)#ipx type-20-propagation outbound
Systems	P550R, P580, P880, and P882.

13-34 Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1