Avaya 106760804 manual Set buffering fabric-port hipri-alloc, Alloc, Fabric-port-spec

Buffering

set buffering fabric-port (hipri-alloc)

Command Mode	Global Configuration.
Description	Set the input or output buffer high priority allocation percentage. The
	default percentage value is 20%.
	* Note: The switch must be rebooted for changes to this parameter to
	take effect.
Syntax	set buffering fabric-port <fabric-port-spec>[routing] {input output} hipri-
	alloc {10 20 30 40 50}
	Table 4-2. Parameters, Keywords, Arguments
	Name	Definition
	<fabric-port-spec>	Enter a particular fabric port or a range of fabric ports on
		a module.
	[routing]	Set the routing buffer parameters.
	{input output}	Input or output buffering.
	hipri-alloc	The high priority allocation percentage values are: 10,
		20, 30, 40, or 50.
Sample Output	The following example sets the buffer high priority allocation percentage
	for fabric port 4/1 to 30%.
	(configure)# set buffering fabric-port 4/2 routing output hipri-
	alloc 30
	Buffers for fabric-port 4/2 set.
Systems	P550R, P580, P880, and P882.

Document No. 10-300090, Issue 1 4-3