Avaya 106760804 manual Set spantree, Tree, in User Guide for the Avaya P580 and P882

	Rapid Spanning Tree Protocol
set spantree
Command Mode	Global Configuration.
Description	Enable or disable individual spanning tree bridges. The default state is
	enabled.

Syntax

To Enable:	set spantree enable {802.1D vlan {<vlan-id> name
	<vlan-name>}}
To Disable:	set spantree disable {802.1D vlan {<vlan-id> name
	<vlan-name>}}

Table 28-6. Parameters, Keywords, Arguments

Name	Definition
enable	Enables the bridge.
disable	Disables the bridge.
802.1D	Use this keyword if the switch is running IEEE 802.1D
	Spanning Tree. For a detailed description of IEEE 802.1D
	Spanning Tree, see Chapter 7, “Configuring Rapid Spanning
	Tree,” in User Guide for the Avaya P580 and P882
	Multiservice Switches, Software Version 6.1.
<vlan-id>	The VLAN ID of the bridge.
	Use the vlan <vlan-id>keyword and variable when the
	switch is running per-VLAN or dual-layer Spanning Tree.
	For a detailed description of per-VLAN and dual-layer
	Spanning Tree, see Chapter 7, “Configuring Rapid Spanning
	Tree,” in User Guide for the Avaya P580 and P882
	Multiservice Switches, Software Version 6.1
<vlan-name>	The VLAN name of the bridge.
	Use the vlan name <vlan-name>keyword and variable
	when the switch is running per-VLAN or dual-layer
	Spanning Tree. For a detailed description of per-VLAN and
	dual-layer Spanning Tree, see Chapter 7, “Configuring Rapid
	Spanning Tree,” in User Guide for the Avaya P580 and P882
	Multiservice Switches, Software Version 6.1

Document No. 10-300090, Issue 1 28-9