Avaya 106760804 manual Interface, To Configure

	IP
interface
Command Mode	Global Configuration.
Description	Configures an interface type and enters Interface Configuration mode. The
	no form of this command deletes an interface with the name specified.
	To enter Interface Configuration mode, omit the [type {nbma ethernet}]
	option.

Syntax

To Configure:	interface <intf-name>[type {nbma ethernet}]
To Delete:	[no] interface <intf-name>

	Table 11-5. Parameters, Keywords, Arguments
	Name	Definition
	<intf-name>	A name for the interface you are attempting to configure or
		create. This name can be series of characters from 1 - 32
		characters long.
	nbma	Sets the interface to be a non-broadcast multi-access (NBMA) IP
		interfaces. NBMA interfaces make it possible for the switch to
		exchange routing information over nonbridged connections
		(routed virtual switch ports (VSPs))
		NBMA functionality was added to RIP and OSPF routing
		protocols on the Avaya Multiservice switch software
	ethernet	Sets the interface to be an ethernet LAN interface.
Systems	P550R, P580, P880, and P882.

Document No. 10-300090, Issue 1 11-9