Avaya 106760804 manual Set spantree default-path-cost

Chapter 28

set spantree default-path-cost

Command Mode	Global Configuration.
Description	Sets the type of default path costs that ports in a specific bridge will use.
	Options are:

■ common-spanning-tree—uses the 16-bit default path costs from

	IEEE Std. 802.1D-1998:
	— For 10 MB ports, 100
	— For 100 MB ports, 19
	— For 1 GB ports, 4
	— For 10 GB ports, 3
	■ rapid-spanning-tree—uses the 32-bit default path costs from IEEE
	Std. 802.1t:
	— 10 Mbps port—2,000,000
	— 100 Mbps port—200,000
	— 1 Gbps port—20,000
	— 10 Gbps port—2,500
	* Note: The switch must be running Rapid Spanning Tree to use the
	Rapid Spanning Tree default path costs. If the switch is running
	common Spanning Tree, it uses the common Spanning Tree
	default path costs regardless of default path cost setting.
Syntax	set spantree default-path-cost {common-spanning-tree rapid-spanning-
	tree} {802.1D vlan {<vlan-id> name <vlan-name>}}

Table 28-8. Parameters, Keywords, Arguments

Name

Definition

common-spanning-	The 16-bit default path costs from IEEE Std. 802.1D-
tree	1998.
rapid-spanning-tree	The 32-bit default path costs from IEEE Std. 802.1t.

1 of 2

28-12 Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1