Avaya 106760804 manual Set console stopbits, Configure# set console stopbits

		Console
set console stopbits
Command Mode	Global Configuration.
Description	Sets the serial console port stopbits to 1 or 2 bits wide. The default setting is
	1.
	Stopbits is not compatible with the serial console port configured in PPP
	mode. The stopbits parameter cannot be accepted or saved when the serial
	console port is configured as PPP mode.
	However, to configure the serial console port stopbits parameter, the serial
	console port can be configured as TTY mode and the stopbits parameter set.
	The serial console port can then be reconfigured as PPP mode. The stopbits
	parameter is saved until the console serial port is reconfigured as TTY
	mode.
Syntax	set console stopbits {1 2}
	Table 5-6. Parameters, Keywords, Arguments
	Name	Definition
	{1 2}	A required parameter that indicates to the serial console port the
		width of the stopbits. Stopbits is not compatible with the serial
		console port configured in PPP mode.
Sample Output	This example sets the serial console port stopbits to 2 bits wide
	(configure)# set console stopbits 2
Systems	P550R, P580, P880, and P882.

Document No. 10-300090, Issue 1 5-7