Avaya 106760804 manual Show port

				80-Series QoS
show port
Command Mode	User.
Description	Displays the QoS settings for a physical port. This command also displays
	the priority of the port, if the port is set to ignore 802.1p tag priority, and if
	the port is set to use the DSCP for bridged IP traffic.
Syntax	show port [{<mod-num> <mod-swport-range>}[...,{<mod-num>
	<mod-swport-range>}]]
	Table 23-18. Parameters, Keywords, Arguments
	Name		Definition
	<mod-num>		The slot number of a module. If you specify <mod-
			num>, the switch displays the QoS settings for all ports
			on the module in the slot that you specify.
	<mod-swport-range>	The slot number of a module, and, either a port number,
			or a range of port numbers having the format Px-Py.
			For example:
			•	To specify port 1 on the module in slot 3, enter 3/
				1.
			•	To specify ports 1 through 5 on the module in
				slot 3, enter 3/1-5.
			If you specify <mod-swport-range>, the switch
			displays the QoS settings for the port or range of ports
			on the module in the slot that you specify.
Sample Output	The following example displays the QoS settings for module 3.
	> show port 3
Systems	■ P550R and P880, 80-series modules only.
	■ P580 and P882.

Document No. 10-300090, Issue 1 23-33