Avaya 106760804 manual Set console initcmd, Configure# set console initcmd AT&D0S0=1

		Console
set console initcmd
Command Mode	Global Configuration.
Description	Sets the modem initialization string for console serial port modem control
	software. The default Modem Configuration String is AT&D0S0=1.
	* Note: This command is not applicable when the console serial port is
	configured in TTY mode. The input will not be accepted or
	stored when the serial port is configured in TTY mode.
	The init command string is used to configure the attached
	external modem so that dial-in sessions will be properly
	accepted by the modem and the connection successfully
	completed between the switch and the remote system. The set
	console initcmd is only accepted when the console serial port is
	configured as PPP mode. Please read your modem’s reference
	literature to find the correct AT parameters.
	There are few configurations and Avaya recommended modems
	that do not require a modem initialization string.
Syntax	set console initcmd [init_cmd_string]
	Table 5-4. Parameters, Keywords, Arguments
	Name	Definition
	[init_cmd_string]	An optional parameter, however, when the parameter is
		missing, it means that the modem initialization string is
		<null>.
Sample Output	The following example sets the console initialization command with an
	initialization string of AT&D080=1
	(configure)# set console initcmd AT&D0S0=1
Systems	P550R, P580, P880, and P882.

Document No. 10-300090, Issue 1 5-5