Chapter 21

set port network-error-detection

Command Mode

Global Configuration.

Description

Configure network error detection and recovery (NEDR) for a port or ports.

Syntax

 

 

 

 

 

 

To Enable:

set port network-error-detection <mod-port-range>[action

 

 

{notify disable-port}] [rising-threshold <rising-threshold-

 

 

value>] [falling-threshold<falling-threshold-value>]

 

 

[interval <interval seconds>]

 

 

 

 

To Disable:

network-error-detection {<mod-port-range> all} action

 

 

off

 

 

 

Table 21-26. Parameters, Keywords, Argument

Name

Definition

 

 

<mod-port-range>

The slot number of the module, and, either port number,

 

or range of port numbers. Enter the port ranges in the

 

format Px-Py. For example:

 

•

To specify port 1 on the module in slot 3, enter 3/1.

 

•

To specify ports 1 through 5 on the module in slot

 

 

3, enter 3/1-5.

 

 

all

Disables NEDR on all ports on all modules in the switch.

 

all can be used only with off.

 

 

action {notify

Action that NEDR performs when the rate of errors

disable-port off}

exceeds the threshold. The options are:

 

•

notify - Logs the event in the event log

 

•

disable-port- Disables the port and logs the event

 

 

in the event log.

 

Note: A port will be disabled if the rate of errors equals

 

 

or exceeds the threshold. Make sure a redundant

 

 

protocol is configured.

 

•

off - Disables NEDR on the port or ports that you

 

 

specify.

 

The default setting is notify.

 

 

 

 

 

1 of 2

 

 

 

21-30

Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1

Page 462
Image 462
Avaya 106760804 manual Set port network-error-detection, Parameters, Keywords, Argument