Avaya 106760804 manual Snmp-server group, Command Mode Description

SNMP

snmp-server group

Command Mode

Description

CAUTION:

Global Configuration.

Creates or modifies a group.

The no command deletes a specific group or all groups of a specific group name (if multiple groups have the same group name). If multiple groups have the same group name, you must enter the appropriate security keyword (noAuth, auth, or priv) to delete one of the groups. If you do not enter a security keyword, all groups of the group name that you enter are deleted.

Avaya recommends that you not modify the predefined groups. When you install v6.0, the existing community strings are assigned to these predefined groups. If you modify them, the community strings may lose their access to the switch. For more information on the migration of existing community strings, Chapter 5, “Configuring SNMP,” in User Guide for the Avaya P580 and P882 Multiservice Switches, Software Version 6.1.

Syntax

To Configure:	snmp-server group <groupname> {noAuth auth priv}
	[read <readview>] [write <writeview>] [notify
	<notifyview>]
To Delete:	no snmp-server group <groupname> {noAuth auth
	priv}

Table 25-5. Parameters, Keywords, Arguments

Parameter	Definition
<groupname>	The name of the group that you want to create or
	modify. The group name can range from 1 to 32
	alphanumeric characters.
noAuth	Requires neither authentication or encryption of
	PDUs.
auth	Requires authentication but not encryption of PDUs.
priv	Requires authentication and encryption of PDUs.
	1 of 2

Document No. 10-300090, Issue 1 25-7