Avaya 106760804 manual Network, To Enable

Chapter 12

network

Command Mode	RIP Router Configuration.
Description	Enables RIP routing on a network or networks. The no form of this
	command disables RIP routing.

Syntax

To Enable:	network <ip-addr> [<wildcard-mask>]
To Disable:	no network <ip-addr> [<wildcard-mask>]

	Table 12-8. Parameters, Keywords, Arguments
	Name	Definition
	<ip-addr>	IP address of the network of directly connected networks.
	<wildcard-	The inverse of a network mask. Enter a 32-bit number in four-
	mask>	part, dotted decimal format. Place ones in the bit positions that
		you want to mask.
		This parameter specifies a range of IP addresses. For example,
		to specify all IP addresses in the 10.10.70 subnet, enter
		10.10.70.0 0.0.0.255.
Sample Output	The following example enables RIP on the 11.0.0.0 subnet which is
	connected to the 11.0.4.5 interface:
	(configure router:rip)# network 111.0.4.5 0.255.255.255
Systems	P550R, P580, P880, and P882.

12-10 Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1