IP

redistribute

Command Mode

Router Configuration (RIP or OSPF).

Description

Creates an IP redistribute list entry.

 

IP redistribute list entries control the distribution of static, local, or

 

dynamically learned routes from one protocol to another protocol. Route

 

redistribution is supported only by dynamic routing protocols, such as RIP

 

and OSPF.

 

* Note: Selecting OSPF as the destination protocol causes OSPF

adjacencies to be reestablished. During this reestablishment, a temporary loss of traffic occurs.

Syntax

To Redistribute Routes to

redistribute {ospf local static}

RIP:

[<access-list-name>]

 

* Note: You must be in RIP Router

 

Configuration mode to enter

 

this command.

 

 

To Redistribute Routes to

redistribute {rip local static} [<access-

OSPF:

list-name>]

 

* Note: You must be in OSPF Router

 

Configuration mode to enter

 

this command.

 

 

To Delete an Entry that

no redistribute {ospf local static}

Redistributes Routes to

 

RIP:

* Note: You must be in RIP Router

 

Configuration mode to enter

 

this command.

 

 

To Delete an Entry that

no redistribute {rip local static}

Redistributes Routes to

 

OSPF:

* Note: You must be in OSPF Router

 

Configuration mode to enter

 

this command.

 

 

Document No. 10-300090, Issue 1

11-51

Page 235
Image 235
Avaya 106760804 manual To Redistribute Routes to, To Delete an Entry that, Redistributes Routes to