Avaya 106760804 manual Dscp

	80-Series QoS
Table 23-1. Parameters, Keywords, Arguments
Name	Definition
permit	Forwards the packet without changing its
	priority.
use-priority	Assigns the priority that you define in the
	following <priority> parameter to the packet.
<priority>	The priority that you want to assign to packets
	that match this ACL. Enter a number between 0
	and 7.
use-diffserv	Classifies traffic by the DSCP in the packet.
[mask]	Masks the three least significant bits of the
	DSCP.
	If you mask the three least significant bits of the
	DSCP, the switch recognizes the remaining bits
	as the precedence field of the type of service
	(TOS) field and classifies the packets
	accordingly.
remark-diffserv	Replaces the DSCP in the packet with the DSCP
	that you enter for the following <dscp>
	parameter.
	The switch uses the DSCP that you enter for the
	<dscp> parameter to classify the packet.
<dscp>	The DSCP that you want to replace the DSCP of
	the packet.
use-l2	Classifies traffic by the layer 2 priority of the
	packet. If you enter use-l2, the switch ignores
	the ACL rule priority and DiffServ priority.
deny	Blocks the packet.
fwd1 fwd2 fwd3 fwd4	The priority that you want to set.
fwd5 fwd6 fwd7 fwd8	The number following the fwd specifies the
	priority. The fwdx arguments are 1-based, while
	the queue priorities are 0-based. Consequently,
	the 1-based priorities are converted to 0-based
	priorities by the QoS features. For example, to
	specify a priority of 0, enter fwd1.
	These keywords are retained from earlier
	versions of software for backward compatibility.
	The use-priority<priority> keyword and
	argument serve the same function.
	2 of 4

Document No. 10-300090, Issue 1 23-3