Avaya 106760804 manual Ipx send-receive-mode, To Restore

Chapter 13

ipx send-receive-mode

Command Mode	Interface Configuration.
Description	Sets the RIP/SAP send and receive characteristics of the IPX interface. The
	no form of this command restores the default, which is talk-listen.

Syntax

To	ipx send-receive-mode {rip sap} {talk-only listen-only
Configure:	talk-listen}
To Restore	[no] ipx send-receive-mode {rip sap}
Default:

	Table 13-13. Parameters, Keywords, Arguments
	Name	Definition
	{rip sap}	Specify RIP or SAP and indicate the send-receive
		characteristic:
	{talk-only listen-	• talk-only- RIP or SAP only transmits updates on the
	only talk-listen}		interface and does not receive them. Does not send
			RIP or SAP requests.
		•	listen-only- RIP or SAP only receives updates on
			the interface and does not transmit them.
		•	talk-listen- RIP or SAP transmits and receives
			updates on the interface.
Sample Output	The following example sets the RIP send-receive characteristics for an

interface labeled “boston” to talk-listen.

	(config-if:boston)#ipx send-receive-mode rip talk-listen
Systems	P550R, P580, P880, and P882.

13-30 Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1