Avaya 106760804 manual Parameters, Keywords, Arguments

Chapter 16

Table 16-1. Parameters, Keywords, Arguments

Name	Definition
service_port	Logs status changes in service ports.
	Use the set port category command to set a port as
	a service port. For information on this command,
	see Chapter 21. This feature makes it possible for
	you to use different notification levels for critical
	(service ports), if desired.
user_port	Logs status changes in user ports.
	Use the set port category command to set a port as
	a user port. For information on this command, see
	Chapter 21. This feature makes it possible for you
	to use different notification levels for critical
	(service ports), if desired.
auth_failure	Logs authentication failures. This is a security-
	related feature used to detect unauthorized SNMP
	activity.
bridge_stat	Logs changes in bridge status.
switch_fabric	Logs failures in the switch fabric. These failures
	are critical and should be monitored closely.
ospf	Logs OSPF events if OSPF protocol event logging
	is enabled.
dvmrp	Logs DVMRP events, if DVMRP event logging is
	enabled.
rip	Logs RIP events if RIP protocol event logging is
	enabled.
ldap	Logs LDAP events if LDAP protocol event
	logging is enabled.
cli	Logs CLI events, if CLI event logging is enabled.
snmp	Logs SNMP events, if SNMP protocol event
	logging is enabled.
appletalk	Logs AppleTalk events if AppleTalk protocol event
	logging is enabled.
redundant_cpu	Logs changes in status of a redundant CPU.
	Notification is sent if:
	•	The status changes from standby to active or
		vice versa.
	•	The active supervisor loses or establishes
		contact with the standby supervisor.
vrrp	Logs VRRP events, if VRRP protocol event
	logging is enabled.
		2 of 3

16-4 Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1