Avaya 106760804 manual Set port use-diffserv, To Enable

Chapter 23

set port use-diffserv

Command Mode	Global Configuration.
Description	Sets a port to classify bridged IP traffic by its DiffServ code point (DSCP).
Syntax
	To Enable:	set port use-diffserv {{<mod-num> <mod-swport-
		range>}[...,{<mod-num> <mod-swport-range>}]
		all-ports} on
	To Disable:	set port use-diffserv {{<mod-num> <mod-swport-
		range>}[...,{<mod-num> <mod-swport-range>}]
		all-ports} off

Table 23-17. Parameters, Keywords, Arguments

Name	Definition
<mod-num>	The slot number of a module. If you specify <mod-
	num>, the switch ignores tag priorities on all ports of
	the module.
<mod-swport-range>	The slot number of a module, and, either a port number,
	or a range of port numbers having the format Px-Py.
	For example:
	•	To specify port 1 on the module in slot 3, enter 3/
		1.
	•	To specify ports 1 through 5 on the module in
		slot 3, enter 3/1-5.
	If you specify <mod-swport-range>, the switch ignores
	tag priorities on the port or range of ports on the module
	in the slot that you specify.
all-ports	All ports in the chassis. If you specify all-ports, all
	ports on all modules in the chassis are set with the same
	priority.
{on off}	Indicates whether you want the port to ignore tag
	priority. Enter on for the port to ignore the tag priority.

23-30 Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1