Avaya 106760804 Syntax

Document No. 10-300090, Issue 1 28-21

Rapid Spanning Tree Protocol

Syntax set spantree portcost <mod-swport-range> [...,<mod-swport-range>]

Name Definition

<mod-swport-

range> The module and the port range.

<port-cost-value> Sets the path cost for this port. The ports that you prefer

be used by the spanning tree should have the lowest path

cost.

If the switch is running common Spanning Tree, the va lid

range for this field is 0 to 65535.

If the switch is running Rapid Spanning Tree, the valid

range for this field is 0 to 200,000,000.

The default setting is 0. If this field is set to 0, the port

uses the default path cost for the bridge.

802.1D Use this keyword if the switch is running IEEE 802.1D

Spanning Tree. For a detailed description of IEEE

802.1D Spanning Tree, see Chapter 7, “Configuring

Rapid Spanning Tree,” in User Guide for the Avaya P580

and P882 Multiservice Switches, Software Version 6.1.

<vlan-id> The VLAN ID of the bridge in which the bridge port is

participating.

Use the vlan <vlan-id> keyword and variable when the

switch is running per-VLAN or dual-layer Spanning

Tree. For a detailed description of per-VLAN and dual-

layer Spanning Tree, see Chapter 7, “Configuring Rapid

Spanning Tree,” in User Guide for the Avaya P580 and

P882 Multiservice Switches, Software Version 6.1

<vlan-name> The VLAN name of the bridge in which the bridge port is

participating.

Use the vlan name <vlan-name> keyword and variable

when the switch is running per-VLAN or dual-layer

Spanning Tree. For a detailed description of per-VLAN

and dual-layer Spanning Tree, see Chapter 7,

“Configuring Rapid Spanning Tree,” in User Guide for

the Avaya P580 and P882 Multiservice Switches,

Software Version 6.1