Avaya 106760804 manual Ip ospf cost, To Configure

	OSPF
ip ospf cost
Command Mode	Interface Configuration.
Description	Specifies the cost of sending a packet on an interface. The no form of this
	command restores the default setting of 1. The valid range is 1 to 65534.

Syntax

To Configure:	ip ospf cost <cost>
To Restore Default:	[no] ip ospf cost

	Table 19-10. Parameters, Keywords, Arguments
	Name	Definition
	<cost>	Unsigned integer value expressed as the link state metric. It can
		be a value in the range 1 to 65534.
Sample Output	The following command enables the cost of sending a packet on an
	interface to 100.
	(config-if:intf3)# ip ospf cost 100
Systems	P550R, P580, P880, and P882.

Document No. 10-300090, Issue 1 19-15