Avaya 106760804 manual Sample Standard ACL Rules, Enter

Policy

Table 20-1. Parameters, Keywords, and Arguments

Name	Definition
<dest-wildcard>	The inverse of a network mask. Enter a 32-bit
	number in four-part, dotted decimal format.
	Place ones in the bit positions that you want to
	mask.
	This parameter specifies a range of IP
	address. For example, to specify all IP
	addresses in the 10.10.70 subnet, enter
	10.10.70.0 0.0.0.255.
any	A destination of 0.0.0.0 and a destination-
	wildcard of 255.255.255.255
host <dest-ip-addr>	The destination IP address that you want to
	assign a priority to.
[{lt <port> eq <port> gt	A destination port or range of destination
<port> range <port>	ports that pass data between two hosts or
<port>}]	switches using the Transmission Control
	Protocol (TCP) or the User Datagram
	Protocol (UDP).
	Enter a number between 0 and 65,535.
	For a complete list of well-known port
	numbers (specifically in relation to the
	destination port), see the following URL:
	http://www.iana.org/assignments/port-
	numbers
[established]	Permits TCP connections to be established
	that match the rule.
	3 of 3

Sample Output: The following table provides examples of standard ACL rules.

Standard ACL

Rules

Table 20-2. Sample Standard ACL Rules

To. . .	Enter. . .
• Use the DSCP in the packet to	access-list MyAccessList1 4 permit
classify all traffic that has a source	use-diffserv mask 10.10.60.0 0.0.0.255
IP address in the 10.10.60 subnet.
• Mask the three least significant bits
of the DSCP.
Assign a priority of 7 to all traffic that	access-list MyAccessList1 5 permit
has a source IP address in the 10.10.70	use-priority 7 10.10.70.0 0.0.0.255
subnet.
	1 of 2

Document No. 10-300090, Issue 1 20-5