Avaya 106760804 manual Parameters, Keywords, Arguments

Chapter 23

Table 23-1. Parameters, Keywords, Arguments

Name	Definition
<protocol-id>	The ID of the protocol that you want to assign a
	priority to. RFC791 defines the protocol IDs.
<source-ip-addr>	The source IP address of the subnet that you
	want to assign a priority to.
<source-wildcard>	The inverse of a network mask. Enter a 32-bit
	number in four-part, dotted decimal format.
	Place ones in the bit positions that you want to
	mask.
	This parameter specifies a range of IP address.
	For example, to specify all IP addresses in the
	10.10.70 subnet, enter 10.10.70.0 0.0.0.255.
any	A source of 0.0.0.0 and a source-wildcard of
	255.255.255.255
host <source-ip-addr>	The source IP address that you want to assign a
	priority to.
[{lt <port> eq <port> gt	A source port or range of source ports that pass
<port> range <port>	between two hosts or switches using the
<port>}]	Transmission Control Protocol (TCP) or the
	User Datagram Protocol (UDP).
	Enter a number between 0 and 65,535.
	For a complete list of well-known port numbers,
	see the following URL:
	http://www.iana.org/assignments/port-numbers
<dest-ip-addr>	The destination IP address of the subnet that you
	want to assign a priority to.
<dest-wildcard>	The inverse of a network mask. Enter a 32-bit
	number in four-part, dotted decimal format.
	Place ones in the bit positions that you want to
	mask.
	This parameter specifies a range of IP address.
	For example, to specify all IP addresses in the
	10.10.70 subnet, enter 10.10.70.0 0.0.0.255.
any	A destination of 0.0.0.0 and a destination-
	wildcard of 255.255.255.255
host <dest-ip-addr>	The destination IP address that you want to
	assign a priority to.
	3 of 4

23-4 Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1