Avaya 106760804 manual Ip routing-mode, Config-ifboston#ip routing-mode Mgmtonly

Chapter 11

ip routing-mode

Command Mode	Interface Configuration.
Description	Sets the IP routing mode on an interface. The no form of this command
	restores the default setting of RT_MGMT.

Syntax

To Configure:	ip routing-mode {RT_MGMT RT_ONLY
	MGMT_ONLY}
To Restore	no ip routing-mode
Default:

	Table 11-22. Parameters, Keywords, Arguments
		Name	Definition
		{RT_MGMT	• Routing/Mgmt - IP routing is enabled on the
		RT_ONLY	interface, and you can manage the switch
		MGMT_ONLY}	through the interface (from the CLI or Web
			Agent).
			• Mgmt Only - You can manage the switch
			through the interface (from the CLI or Web
			Agent), but IP routing is disabled on the
			interface.
			Note: Do not enable routing protocols on an
			interface configured for Mgmt Only since the
			interface will act as an end point and will not
			pass traffic.
			• Routing Only - Routing only interfaces do
			not permit management traffic destined for
			local interfaces but do allow all other traffic
			including management traffic destined for
			interfaces on other switches.
Sample Output
	This example enables local packet consumption and disables IP forwarding
	on an interface labeled “boston”.
	(config-if:boston)#ip routing-mode MGMT_ONLY
Systems	P550R, P580, P880, and P882.

11-44 Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1