Avaya 106760804 manual Ipx service, Parameters, Keywords, Arguments

Chapter 13

ipx service

Command Mode	Global Configuration.
Description	Specifies static SAP entries. To remove static SAP entries, use the no form
	of this command. The default is that no static services are defined.

Syntax

To	ipx service <service-type> <service-name> <network>
Configure:	<node> <socket> <network.next-hop-node> [<hops>]
To Disable:	[no] ipx service <service-type> <service-name>

Table 13-15. Parameters, Keywords, Arguments

Name	Definition
<service-type>	The number of the type of the service. The range is 0-FFFF.
<service-name>	Name of the server that provides the service. The range is 1 to
	47 bytes long.
<network>	An eight-digit hexadecimal number that uniquely identifies a
	network cable segment. It can be a number in the range 1 to
	FFFFFFFD. You do not need to specify leading zeros in the
	network number. For example, for the network number
	000000AA you can enter AA.
<node>	The node number of the target Novell server. This is a 48-bit
	value represented by a MAC address (aa:bb:cc:dd:ee:ff).
<socket>	The socket number for this service. The range is 0 - FFFF
<network.next-	Network number and node address of the next hop to the
hop-node>	server.
	<next-hop-node> - The argument node is the node number of
	the target Novell server. This is a 48-bit value represented by
	a MAC address (aa:bb:cc:dd:ee:ff).
<hops>	Number of hops to the server. The range is 1-16.

13-32 Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1