Avaya 106760804 Entering and Exiting the Command Modes, Mode To Access Prompt Displayed To Exit

Chapter 1

Mode	Description	To Access	Prompt
Router Configuration	Commands to configure the	From Global mode, enter	For DVMRP, OSPF,
	routing protocols.	router <protocol>	and RIP: (configure
		(dvmrp, igmp, ospf, rip,	router:<protocol>)#
		or vrrp).	For IGMP and VRRP:
			(configure)#
Interface Configuration	Commands to configure the	From Global mode, enter	(config-if: <interface-
	interfaces.	interface <interface-	name>)#
		name>.
			2 of 2

Entering and Exiting the Command Modes

See Table 1-2for an explanation of how to access and exit the command modes.

Table 1-2. Entering and Exiting the Command Modes

Mode	To Access	Prompt Displayed	To Exit
User	Log in.	>	Enter exit.
Privileged	From the User mode,	#	Disable or exit returns to the
	enter enable.		User mode.
Global	From the Privileged	(configure)#	Exit returns to the Privileged
Configuration	mode, enter configure.		mode.
Router	From Global mode, enter	For DVMRP, OSPF, and	Exit returns to the Global
Configuration	router <protocol>	RIP: (configure	Configuration mode.
	(dvmrp, igmp, ospf, rip,	router:<protocol>)#	End returns to the Privileged
	or vrrp).	For IGMP and VRRP:	mode.
		(configure)#
Interface	From Global mode, enter	(configure-	Exit returns to the Global
Configuration	interface <interface-	if:<interface-	Configuration mode.
	name>	name>)#	End returns to Privileged
			mode.

1-2 Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1